Vehicle Application

Tech on the Road – Creating an Outline with YelloTools WrapBend-It

Here’s a quick technique on wrapping around raised objects on your vehicle.

What You’ll Learn:

  • A quick method for wrapping around raised vehicle objects.
  • Create a wire stencil using Yellotools Wrapbend-It wire.
  • Trace the stencil on vinyl, cut 1/8″ inside the line.
  • Outline the raised object with masking tape.
  • Position, tack, and add relief cuts for smooth graphic application.
  • Trim, remove excess vinyl, and install on the vehicle’s roof.

Tech on the Road – Creating an Outline with YelloTools WrapBend-It

Step 1: Form the Yellotools Wrapbend-It wire around the raised object. Finish by twisting together both bend of the wire. You will use this as a stencil on your vinyl wrap.

Step 2: Trace the stencil on the vinyl wrap, and then make your cut 1/8″ inside of the stencil.

Step 3: Apply masking tape around the raised object on the vehicle.

Step 4: Position and then tack the graphic on the rear of the raised object. Add relief cuts where necessary.

Step 5: Trim along your traced line and remove excess vinyl. Install the remaining vinyl on the roof of your vehicle.